Unsere Fertigelemente aus Stampflehm bieten eine effiziente und nachhaltige Lösung für alle Bauprojekte. Hergestellt aus der vielfach bewährten und hochwertigsten Stampflehmmischung auf dem deutschen Markt: conluto Stampflehm - Die Mischung macht’s.
Low-energy and industrial prefabrication. Durable, circular and fully reusable. All this with natural materials such as clay and aggregate.
Load-bearing (see dimensioning table). Integrated anchor beam. Heat-retaining. Moisture-regulating. Excellent sound insulation and summer heat protection.
Gut kalkulierbar und schnell auf der Baustelle. Elementiertes Bauen mit Stampflehm.
Warm und monolitisch. Robust und mit der besonderen Textur. Stampflehmwände sind einzigartig.
Advantages of conluto rammed earth walls as prefabricated elements
compared to conventional construction on the building site- Güteüberwacht
- Kalkulierbar in Zeit und Kosten
- Kein aufwändiger Gerüst- und Schalungsbau auf der Baustelle
- Unkalkulierbare Trocknungszeiten entfallen
- Konstante Qualität, da conluto Stampflehmmischung
- Definierte Druckfestigkeit, Klasse 3
- Gleichbleibende Rohdichte, da industriell gefertigt
- Erforschter und vielfach bewährter conluto Stampflehm
Rammed earth as a load-bearing component
All the advantages that clay has to offer as a building material are also reflected in our prefabricated components.
| Wandstärken in [cm] | 24,0 | 32,5 | 36,5 | 42,5 | 50,0 | 60,0 |
| zul. Traglast in [kN/m] | 96,0 | 130,0 | 146,0 | 170,0 | 200,0 | 240,0 |
| Eigengewicht bei 3,0 m Wandhöhe [kN/m] | 15,9 | 21,5 | 24,0 | 28,1 | 33,0 | 39,6 |
| zul. Traglast abzüglich Eigengewicht [kN/m] | 80,1 | 108,5 | 122,0 | 141,9 | 167,0 | 200,4 |
Die aufgeführten Bemessungstabelle dient lediglich der Vorbemessung der angebotenen Stampflehmwänden.
Sie ersetzen nicht den statischen Nachweis!
- Tamped clay with compressive strength class 3 / bulk density 22 kN/m³
- Dimensioning in accordance with the building regulations for clay construction
- Dimensioning is based on permissible stresses, thus characteristic loads are compared with the permissible load-bearing capacity
- Permissible storey height ≤ 3.25 m
- Additional boundary conditions for load-bearing rammed earth walls
- ≤ 32.5 cm wall thickness, see clay construction rules
- Restriction to buildings with one to two full storeys and no more than two units of use
- In the event of deviations from the boundary conditions of the clay construction rules
- A project-specific building permit must be obtained
Prefabricated parts made of clay bricks
We also offer prefabricated wall elements made of clay bricks. These pre-produced elements enable quick and cost-efficient on-site installation and replace time-consuming construction work such as small-scale bricklaying.
This is made possible by the use of new load-bearing clay bricks. These can now be used in load-bearing masonry for buildings up to building class 4 in accordance with DIN 18940 of April 2023. Available in 2DF and 3DF formats, they meet compressive strength class 5. These tested, quality-controlled clay bricks combine the positive properties of clay with the current requirements of sustainable, load-bearing construction, thus offering an environmentally friendly alternative to conventional building materials.
- Güteüberwacht
- Kalkulierbar in Zeit und Kosten
- Kein kleinteiliges Mauern auf der Baustelle
- Konstante Qualität, durch Fertigung unter genormten Bedingungen
- Witterungsunabhängige Montage
- Definierte Druckfestigkeit, Klasse 5
Please contact us for further information!
Internal insulation & renovation
Natural insulation for an optimal indoor climate.
Discover our products